Items:
Value:

View CartCheckout

Water Boilers

Online Catalogue | Coach & Bus | Drink Equipment and Spares |  Water Boilers

Wall Mounted Kettle - 24 volt VEK6 - BE613

Wall Mounted Kettle - 24 volt VEK6 - BE613  


Price:374.00 (Excluding VAT at 20%)

Quantity:

Heating Element for VEK6 -  24 volt Water Boiler - BE715
Heating Element for VEK6 -  24 volt Water Boiler - BE715 - view 1Heating Element for VEK6 -  24 volt Water Boiler - BE715 - view 2

Heating Element for VEK6 - 24 volt Water Boiler - BE715


Part Number BE715
This is the heating element for the TM make water boiler, type VEK6. It is for 24 volt operation at 500W.

Price:64.16 (Excluding VAT at 20%)


Quantity:  

Gasket Seal for VEK6 Heating Element - BE715A

Gasket Seal for VEK6 Heating Element - BE715A


Part Number BE715A
Red rubber heat resistant gasket seal for the element in a VEK6 water boiler.

Price:5.80 (Excluding VAT at 20%)


Quantity:  

VEK6 Thermostat - BE612

VEK6 Thermostat - BE612


Part Number BE612
Thermostat for the TM VEK6 water boiler. This can also be used on the later model Frenzel wall mounted boilers with bi-metal type thermostats.

Price:39.14 (Excluding VAT at 20%)


Quantity:  

Steam Switch for VEK6 Water Boiler- BE712

Steam Switch for VEK6 Water Boiler- BE712


Part Number BE712
This is a thermal switch installed on the vent outlet of the VEK6 water boiler. When the heater is set at full temperature for boiling water, the steam in the vent pipe operates this thermostat to turn the heater off. It will reset when the vent pipe has cooled enough.

Price:12.99 (Excluding VAT at 20%)


Quantity:  

Resettable Overheat Switch for VEK6 - BE710

Resettable Overheat Switch for VEK6 - BE710


Part Number BE710
Thermal overload switch for the VEK6 water boiler. This switch will trip if the boiler is operated without enough water. It is re-set via a button under the heater.
We have two versions:
105 degrees - TM standard fit.
120 degrees - optional where boiling water is the norm and the switch trips out too often.


Price:13.46 (Excluding VAT at 20%)

TEMPERATURE


Quantity:  

Outlet Spout for TM VEK6 Water Boiler - BE705

Outlet Spout for TM VEK6 Water Boiler - BE705


Part Number BE705
Outlet spout for TM model VEK6 water boiler. This spout also fits Frenzel FOKW5 model boilers and other similar variants. It comes with the O ring seal, fixing nut and plastic handle.

Price:47.50 (Excluding VAT at 20%)


Quantity:  

Water Inlet Fitting for VEK6 Boiler - BE703

Water Inlet Fitting for VEK6 Boiler - BE703


Part Number BE703
Brass water inlet fitting with valve for VEK6 water boiler. The inlet thread is 1/2" BSP Male. The loose nut is 3/4" BSP to fit the valve assembly on the VEK6 water boiler.
This fitting will need a thick fibre washer as a seal where it joins the valve assembly.
This assembly incorporates a valve to shut-off the water supply.

Price:45.00 (Excluding VAT at 20%)


Quantity:  

Frenzel FKS5 Thermostat - BE605A
Frenzel FKS5 Thermostat - BE605A - view 1Frenzel FKS5 Thermostat - BE605A - view 2

Frenzel FKS5 Thermostat - BE605A


Part Number BE605A
Thermostat for the Frenzel FKS5 range of water heaters.


Price:54.04 (Excluding VAT at 20%)


Quantity:  

Frenzel FKS5 Overheat Burtton - BE607
Frenzel FKS5 Overheat Burtton - BE607 - view 1Frenzel FKS5 Overheat Burtton - BE607 - view 2

Frenzel FKS5 Overheat Burtton - BE607


Part Number BE607
Safety cut-out for the Frenzel FKS5 water heater. This is the resettable buton switch that protects the boiler from overheating when there is no water in it. This switch carriies the whole load of the ehating elements so the electrical connections must be made correctly.

Price:64.16 (Excluding VAT at 20%)


Quantity:  

Frenzel FKS5 Tank Fitting - BE605TC

Frenzel FKS5 Tank Fitting - BE605TC


Part Number BE605TC
Fitting to attach to the plastic interior tank of the FKS5 water heater. This includes O ring seals - internal and external, and has a 1/2" BSP Male thread for pipe connectors - two of these are on each heater unit.

Price:5.35 (Excluding VAT at 20%)


Quantity:  

Power Connector - 50A - FE550
Power Connector - 50A - FE550 - view 1Power Connector - 50A - FE550 - view 2

Power Connector - 50A - FE550


Part Number FE550
50 Amp Power cable connector. This is the only push together connector we can recommend for the main power to a drink machine. It makes a safe and reliable connection. Supplied with silver plated contacts to suit 16 sq mm cables - these need a suitable crimp tool to install them. This part number is for one half of the connector - you need two to make a new connection.

Price:8.73 (Excluding VAT at 20%)


Quantity:  

70 Amp 24 volt Relay for Water Heaters and Hand Driers on Coaches - BE758

70 Amp 24 volt Relay for Water Heaters and Hand Driers on Coaches - BE758


Part Number BE758
This is a 70 Amp 24 volt relay for use on coach coffee machines and hand driers. It is generally used in the TM CafePerfect 40 coffee percolator- VEK6 water boiler, and other similar devices. It is fitted with large push-on terminals for the power and smaller 6mm ones for the control, It is normally "open" in sense.

Price:15.00 (Excluding VAT at 20%)


Quantity:  

60 Amp 24volt Relay -Model 201 and other Water Heaters - BE141
60 Amp 24volt Relay -Model 201 and other Water Heaters - BE141 - view 160 Amp 24volt Relay -Model 201 and other Water Heaters - BE141 - view 2

60 Amp 24volt Relay -Model 201 and other Water Heaters - BE141


Part Number BE141
24 volt 60 A relay.This is the relay installed internally on the 201 type water heater. BE141 is a single contact normally open relay with a 24 volt coil. The main power terminals are 6mm diameter threads with nuts and the coil terminals are 6mm push on spade type. This can be used for most drink water heaters in use on coaches and for control purposes in the supply wires for a lot of higher current consumers.

Price:18.25 (Excluding VAT at 20%)


Quantity:  

Relay for Water Heaters and Boilers 24v 40-30A - BE756

Relay for Water Heaters and Boilers 24v 40-30A - BE756


Part Number BE756
This is a 24 volt relay offering higher performance for water heaters and boilers. There are two of these in the TM CafePerfect 40 percolator. This relay has .250" spade connectors, the BE 758 model has the larger spade connectors.

Price:17.50 (Excluding VAT at 20%)


Quantity:  

Solenoid Valve - Threaded - 24 volt - BE306

Solenoid Valve - Threaded - 24 volt - BE306


Part Number BE306
24 volt solenoid valve with 1/2" BSP male connectors. This has a plastic body.
Used on coach installations to control water flow to drink systems, toilets and faucets.

Price:24.95 (Excluding VAT at 20%)


Quantity:  

Dual 24 volt Solenoid Valve - BE307

Dual 24 volt Solenoid Valve - BE307


Part Number BE307
Dual 24 volt solenoid valve with plastic body.
The inlet is 3/4" BSP male thread and the outlet pipes are barbed for 10-12mm pipe.
Used to direct the water flow from a single pump to two different outlets.

Price:26.58 (Excluding VAT at 20%)


Quantity:  

Pureflo In-line Water Filter Assembly - BP490
Pureflo In-line Water Filter Assembly - BP490 - view 1Pureflo In-line Water Filter Assembly - BP490 - view 2

Pureflo In-line Water Filter Assembly - BP490


Part Number BP491
Carbon block water filter assembly to improve the taste of drinking water,. This filter has a fine pore carbon block instead of granular carbon which can be replaced easily.It should be replenished every six months

This filter assembly is supplied with a carbon block insert fitted.

The assembly is 280mm long overall - the body is 228mm long and nominally 53mm rouind - the cap is 65mm diameter. The spigots are 10mm diameter (3/8" ) and 28mm long.
Suitable for temperatures from 4 degrees C to 40 degrees C and a maximum operating pressure of 8 bar (120 psi).

For replacement inserts, click here and go to BP491.

Price:14.28 (Excluding VAT at 20%)


Quantity:  

Carysan Mobile 35 litre Water Tank -  BA520
Carysan Mobile 35 litre Water Tank -  BA520 - view 1Carysan Mobile 35 litre Water Tank -  BA520 - view 2Carysan Mobile 35 litre Water Tank -  BA520 - view 3

Carysan Mobile 35 litre Water Tank - BA520


Part Numbe BA520

Carysan 35 litre volume mobile water tank on wheels, with an integral handle, for fresh or wate water. This tank is used for caravans, motorhomes, horseboxes and other vehicle as a tough and convenient way of moving water. It is also used extensively in coaches and buses for drink machine water supplies.

This tank has three openings on the front face and a smaller fitting on the top. The smaller openings on the front are covered by athreaded lid and the hole is 47mm dia..
The larger aperture has an opening of 147mm. There is tool supplied to help to turn the large threade lid.
The small fitting on the top has a plug and a retaining ring. The thread size is 3/4" BSP male.

Dimensions- 855mm long x 370mm across the wheels x 180 high when laid flat. The tank is 160mm without the wheels.

Price:106.40 (Excluding VAT at 20%)


Quantity:  

Very Small Rectangular Sink - BS160

Very Small Rectangular Sink - BS160


Part Number BS160
This is the smallest stainless steel sink which we can pierce for a 1 1/4" waste fitting. Useful as a drainer by a faucet or hot water spout.
Satin "aquablast"finish.
Dimensions:

170mm x 160mm x 65mm. overall.
Bowl size is approx 145mm x 135mm x 65mm deep.
Click here for suitable waste fittings.

Price:18.55 (Excluding VAT at 20%)


Quantity:  

Rectangular Drainer 325 x 175 x 20 - BS155

Rectangular Drainer 325 x 175 x 20 - BS155


Part Number BS155
Stainless steel drainer tray with hole for 1 1/4" waste fitting. Suitable as a drip tray with most drink systems and water heaters.
Can be supplied with or without waste hole.
Satin "aquablast"finish.
Dimensions:
325mm x 175mm x 20mm
Click here for suitable waste fittings.

Price:21.80 (Excluding VAT at 20%)


Quantity:  

Online Catalogue | Coach & Bus | Drink Equipment and Spares |  Water Boilers

 

Opening hours:
Mon-Thurs: 8.30am - 4pm
Fri: 8.30am - 3pm

TEL: 01785 282800

FAX: 01785 282558

Bradtech Ltd, Unit 3, Ladford Covert, Seighford, Stafford ST18 9QL