Welcome to BRADTECH

Bradtech serves the need of all the people on the move

We supply interiors and components to bus, coach, caravan, motorhome and special purpose vehicle users and builders. We are major distributors for products in : Toilets & Sanitation-Water Systems, both hot and cold-Catering equipment- and a large range of support products and accessories.

Look in the product range section to find out more about Bradtech and what we can do for you. Choose from water systems, fridges, power supplies, cooking and catering, toilets and consumables including toilet chemical, water treatment, first aid kits and body fluid disposal kits.
Our accessory range includes cup and drink holders, both folding and fixed as well as dispenser assemblies for in-cup drinks.

Browse products by brand

Best Selling Items

M16 Half Nut for inlet and outlet bush - Model 201 heater - J17-0408 £1.14 Part Number J17-0408 M16 half nut for fixing water bushes into the top plate of the 201 drink water heater. find out more	Silicon Washer - Model 210 Heater - J19-0151 £1.08 Part Number J19-0151 Silicon Washer. This item is used on the 201 water heater to seal the elements and the inlet/outlet bushes in the top plate. It is also used on old model Jason 700 Series drink water heaters to seal the water supply conduit fittings. find out more	Inlet /Outlet Bush - Model 201 Heater - J33-0370 £8.46 Part Number J33-0370 Plastic bush to make water connections on the top plate of the 201 boiler. These are installed using the M16 half nut , J17-0408. The inlet bush for the incoming cold water should also have a silicon pipe fitted to it inside the boiler to lead the cold water to the bottom of the tank. find out more

12mm Stem Adaptor to 1/2" hose x 2 - WWU1282 £5.57 Part Number WWU1282 Adaptor, 12mm male spigot-1/2" flexible hose. find out more	Flipper Pump - WGP0418 £55.30 Part Number WGP0418 Self Priming Lever Operated Hand Pump Swivelling outlet Ideal for use with two sinks Fine flow control Light back & forth pump action Suitable for fresh water and saltwater 7 ltrs capacity (1.85 US gals) per minute find out more	Blade - T50731 £3.84 Part Number T50731 Blade that shuts off the top of the cassette holding tank on the Thetford C250 and C400 toilet models. find out more

New Products

Fridge Evaporator Plate - BR300 £48.02 Part Number BR300 A flat evaporator plate for dc and domestic refrigerators. It is white painted rollbond aluminium with capillary tube installed. This work well with the BR550 condensor-compressor set. We use these as service parts inside fridges for coaches where the existing plate is damaged. Dimensions: 373 x 325 Low pressure tube 900mm long terminated in 1/4" copper - fits directly to the compressor fittings. find out more	Fridge Thermostat - Danfoss - BR320 £26.21 Part Number BR320 This is a Danfoss Service Thermostat Kit No1. The capillary tube is designed to be fastened to the evaporator plate but it can work coiled up in the airflow for a blown air evporator - as long as it is closeley mounted. This thermostat can be used as a service item in a lot of fridges including domestic models. It comes complete with a knob and universal mounting bracket and the capillary tube is 1300mm long. find out more	Spun Copper Drier - R134a - 1/4 inch to Capillary Tube - BR309 £3.17 Part Number BR309 This is a spun copper drier suitable for small fridges using R134a refrigerant. It has to be silver soldered into a new or repaired fridge system prior to evacuation and charging. One end fits the capillary tube and the other end is for 1/4 inch tube. These can be used in conjunction with our BR550 compressor set and BR300 evaporator. You need to put a piece of copper tube on the condensor tube of the BR550 to make up to 1/4". This should always be replaced if a fridge has new components fitted in the system and is re-charged. find out more

Danfoss BD35F Fridge Compressor and Condenser Assembly - BR550 £456.00 Part Number BR550 A fridge compressor set assembly with condenser and fan already fitted. The compressor is the Danfoss BD35F 12/24volt dual voltage model and it is fitted with a controller - 101N0210. There is no refrigerant in this unit, it is ready to be fitted into a system by a fridge engineer. It is suitable for most coach and vehicle fridges up to 100 litres volume as long as they are properly insulated. It is the direct spare part assembly for Indel 'B' fridges. The compressor features variable speed and options for voltage limits on the supply power. There are basic settings incorporated in this set - contact Bradtech for more information about these features. Dimensions: 270mm long - needs access for the controller and at least 25mm air space by the condensor. 160mm wide - also needs space for air flow on the condensor. 160mm high. For R134a refrigerant. This unit has to be mounted level and with adequate airflow to work properly - both cool air incoming and somewhere for the warm air to escape. The fan is fitted to draw air in from the condensor end and over the compressor. Although this is the best flow direction, the fan can be installed to blow the opposite way. find out more	Whale Elegance Tap Microswitch Kit - WRT9000 £12.98 Part Number WRT9000 Microswitch kit for the Whale Elegance range of taps. Although usually supplied with the new taps, some bulk packed Elegance taps do not have switches with them (WRT2030 for example). Can also be required to change from a pressurised pump system to a switched pump system. Kit has two microswitches included. find out more