Bradtech

Welcome to BRADTECH

Bradtech serves the need of all the people on the move

We supply interiors and components to bus, coach, caravan, motorhome and special purpose vehicle users and builders. We are major distributors for products in : Toilets & Sanitation-Water Systems, both hot and cold-Catering equipment- and a large range of support products and accessories.

Look in the product range section to find out more about Bradtech and what we can do for you. Choose from water systems, fridges, power supplies, cooking and catering, toilets and consumables including toilet chemical, water treatment, first aid kits and body fluid disposal kits.
Our accessory range includes cup and drink holders, both folding and fixed as well as dispenser assemblies for in-cup drinks.

Browse products by brand

WhaleThetfordVikanAntares
TransvendDometicIndelTM

 

 

Bradtech Ltd

Best Selling Items

Level Indicator LED for C200 Toilets - T23718

Level Indicator LED for C200 Toilets - T23718

3.77

Part Number T23718
LED indicator for C200 tolet models that shows whn the cassette holdding tank is full. This LED kit has connectors and instructions to allow it to be usaed on CW/CWE models and C/CS types.
Although there is no indication on the wire colours of this light - it is a diode and consequently polarity sensitive. It is advisable to test the light before finally crimping the connectors and sealing the joints.

find out more

Reed Switch - C250 - One Switch - T50713

Reed Switch - C250 - One Switch - T50713

7.68

Part Number T50713

Reed switch for the Thetford C250 toilet models, with only a flush button and a single waste tank level indicator.

This is a small circuit board incorporating the reed switch that senses the waste tank level. This is the basic version - described as the "one switch" model.

This has one reed switch fitted (the red bar component) and a board part number of 50569. The board style may be one of two types. One type has the number on a small beige square near the contacts and the other style has the number by a small soldered-on component.

Dimensions: 30mm x 40mm

find out more

C400 and C500 Cassette Tank Mechanism Complete - T32331 and T32332

C400 and C500 Cassette Tank Mechanism Complete - T32331 and T32332

The complete shutter mechanism for the C400 and C500 series toilet holding tanks. Includes float and magnet for level indicator and seal for fitting to the tank.
The photo shows the mechansim with the float arm for the C400 model fitted - the float for the C500 model toilet comes with the kit.
This kit does not have the sliding cover T32301 included with it.

A right hand toilet is one where the tank is removed from your right hand side viewed as if you were sitting on the toilet.

The only difference on these handed parts for this toilet is the position of the moulded on marks to help alignment when fitting. They can be fitted 180 degrees round to suit an opposite hand toilet - this is the instruction in the "fresh-up sets".
find out more

Gulper 220 Gear Wheel - W755.36

Gulper 220 Gear Wheel - W755.36

9.07

Part Number W755.36
Large gear wheel for Gulper 220 pumps. It requires some technical ability to replace this part - please contact Bradtech for advice.
find out more

Vent Button - T07524

Vent Button - T07524

4.78

Part Number T07524
Vent Button kit for waste holding tank on Porta Potti toilets. This also fits C2,3 and4 model cassette toilet holding tanks and C200,C250 and C260 cassette holding tanks.

find out more

C400/500 Shaft - T51802

C400/500 Shaft - T51802

5.98

Part Number T51802
Shaft and kit of parts to connect the flush lever to the holding tank mechanism on C400 and C500 cassette toilets. Does not include the metal link and screws.
find out more

New Products

Lever Action Fridge Lock - BR200

Lever Action Fridge Lock - BR200

55.50

Part Number BR200
Satin chrome finish lever action door lock commonly used for commercial fridges.

This comes with a pair of keys, fixing screws and a strike moulding.
This style is commonly used on coach fridges used on Van Hool coaches among others.

The locking action is positive and has an overcentre action so the door will slam shut and pull the lever to open.
The whole lock and handle is 230mm long.The body of the l;ock is 150mm long.
The lock assembly is for screwing to the edge of a door and is 22mm thick proud of the edge of the door.
The lock body is 30mm high. With the standard large strike used. the top of the lock is approximately 41mm above the face that the strike is fastened to and the screw holes are 23mm above the face (this would ususally be to the centre of the edge of the door panel).
The lock screw hole centres are 110mm apart.

This lock comes with a tall style strike moulding. You can buy a short version -

The optional shallower strike - BR201A - is about 10mm shallower and has the lock just above the fridge face when closed unless packing is used..

find out more

Fridge Handle Strike Mouldings - BR201

Fridge Handle Strike Mouldings - BR201

Part Number BR201 and BR201A
Plastic strike plate mouldings for the refrigerator lever lock, BR200.
These come either 16mm high or 26mm high - the 26mm high one is usually supplied with the lever handle.
The screw holes are slotted to allow some longitudinal adjustment and are 29mm apart.

If you purchase a lock assembly, BR200 . it will come with the taller latch moulding or strike.
find out more

Whale Gulper Hypalon Diaphragm - W755.08

Whale Gulper Hypalon Diaphragm - W755.08

4.63

Part Number W755.08
This is a replacement diaphragm for the Whale Gulper pump series and this version is made of Hypalon rubber which is suitable for pumping diesel, kerosene and similar liquids.
The standard WBP range of Gulpers and their service kits have Santoprene diaphragms which are suitable for water and similar liquids.
This diaphragm is already installed in the WHD 1552 pump.
find out more

Whale Gulper 220 and 320 Head Service Kit.- WAK2050

Whale Gulper 220 and 320 Head Service Kit.- WAK2050

20.21

Part Number WAK2050
This service kit for the Gulper type pumps comes as a front housing with the flap valves pre-installed.
It also includes the outlet fitting, new tricuspid valve and diaphragm.
The materials used in this kit are nitrile and Santoprene. It is not suitable for diesel and kerosene.
Please contact Bradtech for information about servicing diesel and kerosene pumps.

find out more

Whale Gulper Pump for Diesel and Kerosene - WHD1552B

Whale Gulper Pump for Diesel and Kerosene - WHD1552B

128.62

Part Number WHD1552B

Gulper 220 12volt pump with rubber parts in Nitrile and Hypalon suitable for pumping diesel, kerosene and other light oil products.

24volt models of this Gulper pump are not standard but we can assemble one if required to order. Please contact Bradtech for a quotation.

Up to 14 ltrs (3.7 US gals) per minute with water.

Will run dry without damage and pump a mixture of air diesel and water.

Specially designed to pump oil, diesel, kerosene and water or a mixture.

Large single diaphragm
Virtually non-choke valves
No filter required
Self-priming up to 3 m (10 ft)
Double outlet valve ensuring continuous flow
Multi directional head
Can be mounted almost anywhere
Low power consumption

This pump can be used for special purposes such as cleaning out the bottom of oil storage tanks, transferring heaing oil or disel from one tank to another.
The nature of the pumping action makes itsuitable for removal of oil/water and debris from tanks and containers.


find out more